Catalog Home Page

Publications: Mohammadpour, Ehsan

Stats for Mohammadpour, Ehsan
Export as [feed] RSS
Group by: Item Type | Year
Number of items: 44.

Journal Article

Patel, S.B., Mohammadpour, E., Mondinos, N., Zhao, X., Veder, J-P, Zhou, Z., Moh, T.S.Y., Hsien Liew, W.Y., Lee, S. and Jiang, Z-T (2019) High temperature in-situ phase stability of sputtered TiAlxN coatings. Journal of Alloys and Compounds, 786 . pp. 507-514.

Ibrahim, K., Rahman, M.M., Zhao, X., Veder, J-P, Zhou, Z-F, Mohammadpour, E., Majeed, R.H., Nikoloski, A.N. and Jiang, Z-T (2018) Annealing impacts on microstructural, optical, mechanical properties of sputtered CrN thin film coatings: Experimental studies and finite element modeling. Journal of Alloys and Compounds, 750 . pp. 451-464.

Ibrahim, K., Rahman, M.M., Taha, H., Mohammadpour, E., Zhou, Z., Yin, C-Y, Nikoloski, A. and Jiang, Z-T (2018) Structural, morphological, and optical characterizations of Mo, CrN and Mo:CrN sputtered coatings for potential solar selective applications. Applied Surface Science . In Press.

Mohammadpour, E., Altarawneh, M.ORCID: 0000-0002-2832-3886, Jiang, Z-T, Mondinos, N. and Dlugogorski, B.Z. (2017) Electronic properties and stability phase diagrams for cubic BN surfaces. Molecular Simulation, 43 (4). pp. 267-275.

Mohammadpour, E., Jiang, Z-T, Altarawneh, M.ORCID: 0000-0002-2832-3886, Mondinos, N., Rahman, M.M., Lim, H.N., Huang, N.M., Xie, Z., Zhou, Z-F and Dlugogorski, B.Z. (2017) Experimental and predicted mechanical properties of Cr1−xAIxN thin films, at high temperatures, incorporating in situ synchrotron radiation X-ray diffraction and computational modelling. RSC Advances, 7 (36). pp. 22094-22104.

Miran, H.A., Rahman, M.M., Jiang, Z-T, Altarawneh, M.ORCID: 0000-0002-2832-3886, Chuah, L.S., Lee, H-L, Mohammadpour, E., Amri, A., Mondinos, N. and Dlugogorski, B.Z. (2017) Structural and optical characteristics of pre- and post-annealed sol-gel derived CoCu-oxide coatings. Journal of Alloys and Compounds, 701 . pp. 222-235.

Mohammadpour, E., Altarawneh, M.ORCID: 0000-0002-2832-3886, Al-Nu’airat, J., Jiang, Z-T, Mondinos, N. and Dlugogorski, B.Z. (2017) Thermo-mechanical properties of cubic titanium nitride. Molecular Simulation, 44 (5). pp. 415-423.

Mohammadpour, E., Jiang, Z-T, Altarawneh, M.ORCID: 0000-0002-2832-3886, Xie, Z., Zhou, Z.F., Mondinos, N., Kimpton, J. and Dlugogorski, B.Z. (2016) Predicting high temperature mechanical properties of CrN and CrAlN coatings from in-situ synchrotron radiation X-ray diffraction. Thin Solid Films, 599 . pp. 98-103.

Mohammadpour, E., Awang, M., Kakooei, S. and Akil, H.M. (2014) Modeling the tensile stress–strain response of carbon nanotube/polypropylene nanocomposites using nonlinear representative volume element. Materials & Design, 58 . pp. 36-42.

Mohammadpour, E. and Awang, M. (2013) Nonlinear Multi-Scale finite element method to predict tensile behavior of carbon Nanotube-Reinforced polymer composites. Journal of Nano Research, 26 . pp. 169-176.

Hanaei, H., Ahmadun, F.R.B., Mohammadpour, E. and Kakooei, K. (2013) Optimization of carbon nano tubes synthesis using fluidized bed chemical vapor deposition: A statistical approach. Caspian Journal of Applied Sciences Research, 2 (3). pp. 46-55.

Mohammadpour, E. and Awang, M. (2012) Nonlinear finite-element modeling of graphene and single- and multi-walled carbon nanotubes under axial tension. Applied Physics A, 106 (3). pp. 581-588.

Kakooei, S., Rouhi, J., Mohammadpour, E., Alimanesh, M. and Dehzangi, A. (2012) Synthesis and characterization of Cr-Doped AL2O3 Nanoparticles prepared via aqueous combustion method. Caspian Journal of Applied Sciences Research, 1 (13). pp. 16-22.

Awang, M., Hor, W-V, Mohammadpour, E., Abdullah, M.Z. and Ahmad, F. (2011) Functionalization and characterization of carbon nanotubes/polypropylene nanocomposite. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 5 (10). pp. 857-861.

Mohammadpour, E., Awang, M. and Abdullah, M.Z. (2011) Predicting the Young’s Modulus of Single-Walled Carbon Nanotubes using Finite Element Modeling. Journal of Applied Sciences, 11 (9). pp. 1653-1657.

Mohammadpour, E. and Awang, M. (2011) Predicting the nonlinear tensile behavior of carbon nanotubes using finite element simulation. Applied Physics A, 104 (2). pp. 609-614.

Mohammadpour, E. and Vahdati, K.J. (2008) In-situ production of CU-AL2O3 nanocomposite by using mechanochemical route. Journal of School of Engineering, 20 (2). pp. 1-13.

Conference Paper

Mohammadpour, E., Jiang, Z-T, Mondinos, N., Rahman, M.M., Altarawneh, M.ORCID: 0000-0002-2832-3886 and Dlugogorski, B.Z. (2016) Structural characterizations of magnetron sputtered CrSiN and CrNiN coatings via in-situ Synchrotron radiation XRD analysis. In: Australian Institute of Physics (AIP) WA 2016 Postgraduate Conference, 13 October 2016, University of Western Australia, Perth

Rahman, M.M., Jiang, Z-T, Ibrahim, K., Mohammadpour, E., Widjaja, H., Mondinos, N. and Amri, A. (2014) Development of solar selective surfaces for photothermal applications. In: Centenary Postgraduate Symposium. Royal Society of Western Australia, 3rd October 2014, Webb Lecture Theatre, University of Western Australia

Mohammadpour, E. and Awang, M. (2012) Finite element modeling of multi-walled carbon nanotubes under axial tension. In: 2012 International Conference on Enabling Science and Nanotechnology (ESciNano), 5 - 7 January 2012, Johor Bahru, Malaysia

Mohammadpour, E. and Awang, M. (2011) A finite element model for predicting the tensile behavior of carbon nanotube. In: 2011 National Postgraduate Conference (NPC), 19 - 20 September 2011, Kuala Lumpur, Malaysia

Mohammadpour, E. and Awang, M. (2010) Predicting a stretching behavior of carbon nanotubes using finite element method. In: 2010 International Conference on Enabling Science and Nanotechnology (ESciNano), 1 - 3 December 2010, Kuala Lumpur, Malaysia

Conference Item

Mohammadpour, E., Jiang, Z-T, Altarawneh, M.ORCID: 0000-0002-2832-3886, Mondinos, N. and Dlugogorski, B.Z. (2017) Structural and mechanical characterisations of CrAlN coatings via In-situ synchrotron radiation XRD analysis. In: Australian X-ray Analytical Association (AXAA) 2017, 5 - 9 February 2017, Melbourne, Australia.

Mohammadpour, E., Jiang, Z-T, Altarawneh, M.ORCID: 0000-0002-2832-3886, Mondinos, N. and Dlugogorski, B.Z. (2016) Structural and mechanical characterizations of magnetron sputtered CrAlN coatings via in-situ Synchrotron Radiation XRD analysis. In: Australian X-ray Analytical Association (AXAA) 2016: WA Student Seminars, 5th October 2016, Curtin University. Bentley.

Widjaja, H., Jiang, Z-T, Rahman, M.M., Mohammadpour, E., Taha, H., Altarawneh, M.ORCID: 0000-0002-2832-3886, Yin, C-Y, Mondinos, N. and Dlugogorski, B.Z. (2015) Geometrical investigations on the electronic structure of elemental adsorption-on graphene. In: Australian Institute of Physics 2015 Western Australian Postgraduate Conference, 2 October, Perth, Western Australia.

Mohammadpour, E., Jiang, Z-T, Altarawneh, M.ORCID: 0000-0002-2832-3886, Mondinos, N. and Dlugogorski, B.Z. (2015) High temperature structural properties of CrAlTiN coatings from in-situ Synchrotron Radiation. In: Asia Oceania Forum for Synchrotron Radiation Research, 25 - 27 November, National Centre for Synchrotron Science.

Rahman, M.M., Jiang, Z-T, Zhou, Z-F, Taha, H., Widjaja, H., Mohammadpour, E., Yin, C-Y, Mondinos, N., Altarawneh, M.ORCID: 0000-0002-2832-3886 and Dlugogorski, B.Z. (2015) Solar selective absorbing characteristics and thermal stability of TiAISiN coatings. In: Australian Institute of Physics 2015 Western Australian Postgraduate Conference, 2 October, Perth, Western Australia.

Taha, H., Jiang, Z-T, Henry, D.ORCID: 0000-0002-9629-4423, Amri, A., Yin, C-Y, Rahman, M.M., Widjaja, H., Mohammadpour, E. and Mondinos, N. (2015) Structural and optical properties of spin coating ITO thin films. In: Australian Institute of Physics 2015 Western Australian Postgraduate Conference, 2 October, Perth, Western Australia.

Mohammadpour, E., Jiang, Z-T, Rahman, M.M., Widjaja, H., Taha, H., Mondinos, N., Altarawneh, M.ORCID: 0000-0002-2832-3886 and Dlugogorski, B.Z. (2015) Study the structural changes in CrAIN coatings by in-situ synchrotron radiation X-ray diffraction. In: Australian Institute of Physics 2015 Western Australian Postgraduate Conference, 2 October, Perth, Western Australia.

Mohammadpour, E., Rahman, M.M., Ibrahim, K., Widjaja, H., Mondinos, N. and Jiang, Z-T (2014) Phase transition in CrxAl(1-x)N coating at high temperatures. In: Centenary Postgraduate Symposium. Royal Society of Western Australia, 3rd October 2014, Webb Lecture Theatre, University of Western Australia.

Book Chapter

Awang, M., Mohammadpour, E. and Muhammad, I.D. (2015) Effect of geometrical parameters on tensile properties of nanotubes. In: Finite Element Modeling of Nanotube Structures. Springer, pp. 133-155.

Awang, M., Mohammadpour, E. and Muhammad, I.D. (2015) Finite Element Analysis of Multi-walled Nanotubes. In: Finite Element Modeling of Nanotube Structures. Springer, pp. 157-163.

Awang, M., Mohammadpour, E. and Muhammad, I.D. (2015) Finite element modeling of Nanotubes. In: Finite Element Modeling of Nanotube Structures. Springer, pp. 27-46.

Awang, M., Mohammadpour, E. and Muhammad, I.D. (2015) Influence of Defects on the Strength of Graphene and Carbon Nanotube. In: Finite Element Modeling of Nanotube Structures. Springer, pp. 165-173.

Awang, M., Mohammadpour, E. and Muhammad, I.D. (2015) Interatomic Bonding. In: Finite Element Modeling of Nanotube Structures. Springer, pp. 15-25.

Awang, M., Mohammadpour, E. and Muhammad, I.D. (2015) Linear Finite Element Analysis of Nanotubes. In: Finite Element Modeling of Nanotube Structures. Springer, pp. 63-106.

Awang, M., Mohammadpour, E. and Muhammad, I.D. (2015) Mechanical Behavior of Carbon Nanotube-Reinforced Polymer Composites. In: Finite Element Modeling of Nanotube Structures. Springer, pp. 175-212.

Awang, M., Mohammadpour, E. and Muhammad, I.D. (2015) Nanotube modeling using beam element. In: Finite Element Modeling of Nanotube Structures. Springer, pp. 47-61.

Awang, M., Mohammadpour, E. and Muhammad, I.D. (2015) Nanotubes. In: Finite Element Modeling of Nanotube Structures. Springer, pp. 1-13.

Awang, M., Mohammadpour, E. and Muhammad, I.D. (2015) Non-linear Finite Element Analysis of Nanotubes. In: Finite Element Modeling of Nanotube Structures. Springer, pp. 107-131.

Mohammadpour, E. and Awang, M. (2014) Investigation of Carbon Nanotube Defects on Its Strength Using Nonlinear Finite Element Modeling. In: Öchsner, A. and Altenbach, H., (eds.) Design and Computation of Modern Engineering Materials. Springer, pp. 383-390.

Mohammadpour, E. and Awang, M. (2012) A finite element model to investigate the Stress–Strain behavior of single walled carbon nanotube. In: Öchsner, A., da Silva, L.F.M. and Altenbach, H., (eds.) Materials with Complex Behaviour II. Springer, Berlin, Heidelberg, pp. 369-381.

Book

Awang, M., Mohammadpour, E. and Muhammad, I.D. (2016) Finite Element Modeling of Nanotube Structures. Springer.

Thesis

Mohammadpour, Ehsan (2018) High Temperature Structural and Mechanical Properties of Hard Metal Doped CrNx and TiNx Coatings: Synchrotron Radiation and DFT Assisted Studies. PhD thesis, Murdoch University.

This list was generated on Tue Aug 20 20:51:44 2019 UTC.