Composition, temperature and frequency dependent magnetic, dielectric and electrical properties of magnesium-zinc ferrites
Akhter, S., Hossain, T., Bashar, M.S., Rahaman, M., Hossain, M.A., Ahmed, F., Uddin, N., Pervin, S., Sheak, M.S. and Rahman, M.M.ORCID: 0000-0002-6778-7931
(2012)
Composition, temperature and frequency dependent magnetic, dielectric and electrical properties of magnesium-zinc ferrites.
Journal of Bangladesh Academy of Sciences, 36
(2).
pp. 199-212.
*No subscription required
Abstract
Polycrystalline spinel MgxZn0.3Cu0.7-2xFe2+xO4, where x = 0.10, 0.20, 0.25, 0.30 and 0.35 ferrites (hereafter abbreviated as Mg-Zn) have been prepared by conventional double sintering technique. The samples were sintered at 1250°C in air for 6 hours. Measurements have been done at temperature and frequency ranges of 0 - 350°C and 0 - 500 kHz, respectively. In this work, some extrinsic magnetic properties such as Curie temperature, initial permeability, loss factor, quality factor, dielectric constant and resistivity of the samples have been studied. The Curie temperature and loss tangent of the samples decreased with increase in Cu-content whereas permeability, Qfactor, resistivity and dielectric constant have been noticed to be increased with the increase in Cucontent. The decrease in Curie temperature related to fact of weakening the strength of exchange AB interaction. Maxwell-Wagner type of interfacial polarization might have found correlated with the normal dielectric behavior of the samples, however no relaxation peaks were observed in the dielectric dispersion curves of the Mg-Zn samples in virgin state or doped state.
Item Type: | Journal Article |
---|---|
Murdoch Affiliation(s): | School of Engineering and Energy |
Publisher: | Bangladesh Academy of Sciences |
URI: | http://researchrepository.murdoch.edu.au/id/eprint/56357 |
![]() |
Item Control Page |
Downloads
Downloads per month over past year