Publications: Pryor, Trevor
Tamir, K., Urmee, T. and Pryor, T. (2015) Issues of small scale renewable energy systems installed in rural Soum centres in Mongolia. Energy for Sustainable Development, 27 . pp. 1-9.
Ally, J., Pryor, T. and Pigneri, A. (2015) The role of hydrogen in Australia's transport energy mix. International Journal of Hydrogen Energy, 40 (13). pp. 4426-4441.
Amri, A., Jiang, Z-T, Pryor, T., Yin, C-Y and Djordjevic, S. (2014) Developments in the synthesis of flat plate solar selective absorber materials via sol–gel methods: A review. Renewable and Sustainable Energy Reviews, 36 . pp. 316-328.
Amri, A., Jiang, Z-T, Wyatt, N., Yin, C-Y, Mondinos, N., Pryor, T. and Mahbubur Rahman, M. (2014) Optical properties and thermal durability of copper cobalt oxide thin film coatings with integrated silica antireflection layer. Ceramics International, 40 (10, Part B). pp. 16569-16575.
Amri, A., Duan, X-F, Yin, C-Y, Jiang, Z-T, Mahbubur Rahman, M. and Pryor, T. (2013) Solar absorptance of copper–cobalt oxide thin film coatings with nano-size, grain-like morphology: Optimization and synchrotron radiation XPS studies. Applied Surface Science, 275 . pp. 127-135.
Amri, A., Jiang, Z-T, Bahri, P.A., Yin, C-Y, Zhao, X., Xie, Z., Duan, X-F, Widjaja, H., Mahbubur Rahman, M. and Pryor, T. (2013) Surface electronic structure and mechanical characteristics of copper cobalt oxide thin film coatings: Soft X-ray synchrotron radiation spectroscopic analyses and modeling. The Journal of Physical Chemistry C, 117 (32). pp. 16457-16467.
Amri, A., Jiang, Z-T, Pryor, T., Yin, C-Y, Xie, Z. and Mondinos, N. (2012) Optical and mechanical characterization of novel cobalt-based metal oxide thin films synthesized using sol–gel dip-coating method. Surface and Coatings Technology, 207 . pp. 367-374.
Ally, J. and Pryor, T. (2009) Accelerating hydrogen implementation by mass production of a hydrogen bus chassis. Renewable and Sustainable Energy Reviews, 13 (3). pp. 616-624.
Mala, K., Schläpfer, A. and Pryor, T. (2009) Better or worse? The role of solar photovoltaic (PV) systems in sustainable development: Case studies of remote atoll communities in Kiribati. Renewable Energy, 34 (2). pp. 358-361.
Mala, K., Schläpfer, A. and Pryor, T. (2008) Solar photovoltaic (PV) on atolls: Sustainable development of rural and remote communities in Kiribati. Renewable and Sustainable Energy Reviews, 12 (5). pp. 1345-1363.
Ally, J. and Pryor, T. (2007) Life-cycle assessment of diesel, natural gas and hydrogen fuel cell bus transportation systems. Journal of Power Sources, 170 (2). pp. 401-411.
Patel, M., Cole, G.R., Pryor, T.L. and Wilmot, N. (2004) Development of a novel SCADA system for laboratory testing. ISA Transactions, 43 (3). pp. 477-490.
Carr, A.J. and Pryor, T.L. (2004) A comparison of the performance of different PV module types in temperate climates. Solar Energy, 76 (1-3). pp. 285-294.
Lund, C.P., Wilmot, N., Pryor, T. and Cole, G. (2001) Demonstrating remote area power supply systems on the World Wide Web. Renewable Energy, 22 (1-3). pp. 345-351.
Lund, C.P., Luczak, K., Pryor, T., Cornish, J.C.L., Jennings, P.J., Knipe, Phillip and Ahjum, F. (2001) Field and laboratory studies of the stability of amorphous silicon solar cells and modules. Renewable Energy, 22 (1-3). pp. 287-294.
Sharma, H., Islam, S., Pryor, T. and Nayar, C.V. (2001) Power quality issues in a wind turbine driven induction generator and diesel hybrid autonomous grid. Journal of Electrical and Electronics Engineering, Australia, 21 (1). pp. 19-25.
Nguyen, B.T. and Pryor, T.L. (1998) Feasibility of solar hot water systems in Vietnam. Renewable Energy, 13 (4). pp. 415-437.
Nguyen, B.T. and Pryor, T.L. (1996) A computer model to estimate solar radiation in Vietnam. Renewable Energy, 9 (1-4). pp. 1274-1278.
Dubey, O.P. and Pryor, T.L. (1996) A user oriented simulation model for deep bed solar drying of rough rice. Renewable Energy, 9 (1-4). pp. 695-699.
Nayar, C.V., Perahia, J., Thomas, F., Phillips, S.J., Pryor, T. and James, W.L. (1991) Investigation of capacitor-excited induction generators and permanent magnet alternators for small scale wind power generation. Renewable Energy, 1 (3-4). pp. 381-388.
Amri, A., Jiang, Z-T, Pryor, T., Yin, C-Y and Mondinos, N. (2012) Characterization of copper cobolt oxide thin film coatings synthesized via sol-gel dip-coating method. In: 3rd International Chemical and Environmental Engineering Conference (ICEEC 2012), 21 - 23 December, Kuala Lumpur, Malaysia pp. 31-36.
Holtorf, H., Calais, M., Pryor, T. and Urmee, T. (2012) An approach to Solar Home System's success. In: 2nd International Conference on the Developments in Renewable Energy Technology, ICDRET 2012, 5 - 7 January, Dhaka, Bangladesh pp. 239-242.
Holtorf, H., Pryor, T., Urmee, T. and Calais, M. (2011) Appraisal of success of Solar Home Systems. In: Small PV-Applications, Rural Electrification and Commercial Use, OTTI Symposium, 6 - 7 June, Ulm, Germany
Weinholz, D.P., Harries, D.N. and Pryor, T. (2009) Modelling the potential capacity of PV systems to reduce peak electricity loads. In: 29th ISES Biennial Solar World Congress, ISES 2009, 11 - 14 October, Johannesburg, South Africa
Lund, C.P., Luczak, K., Pryor, T., Cornish, J.C.L. and Jennings, P. (1998) Studies of stability and performance of solar cells and modules. In: Proceedings of Solar '98 the 36th Annual Conference of the Australian and New Zealand Solar Energy Society, 25 - 27 November, Christchurch, New Zealand pp. 510-517.
Amri, A., Jiang, Z-T, Pryor, T. and Yin, C-Y (2012) Optical properties of copper cobalt metal oxide thin films synthesized via sol-gel dip-coating method. In: 7th International Conference on Surfaces, Coatings and Nanostructured Materials, 18 - 21 September, Prague, Czech Republic.